(April 2018)
|
The Insurance Services Office (ISO) Builders Risk Coverage Form insures primary buildings that are being built. The building is covered as it is being built as well as property that is intended to become a permanent part of the final project. Coverage may be written on a reporting or non-reporting basis.
Builders Risk Coverage requires at least the following six forms:
Related Article: IL 00 17–Common
Policy Conditions Analysis
Related Article: CM 00 01–Commercial Inland Marine Conditions
The advisory Builders Risk Declarations does not have spaces for the named insured, its mailing address, and other named insured information, the policy period, or the description of the insured business. That information is on the Common Policy Declarations. IH DS 70 contains the following information:
The name of the insurance company that provides the coverage and the name of the agent or broker that produces the business are entered in the spaces provided.
Only property that is part of the described construction project is covered. Many coverages are only provided while the property is at the described jobsite so it is very important to complete the following information very precisely.
Limits of insurance must be entered for the following items:
o Ground Up Construction
o Renovations
o Existing Building or Structure
Note: This applies only if IH 70 04–Existing Building or Structure Coverage or IH 70 05–Existing Building or Structure with Limited Collapse Coverage is attached
Note: This is similar to a catastrophe limit. There is no specific explanation in the coverage form as to how this limit works though.
All of the following additional coverages apply at a defaulted limit in the coverage form. This area is used to change that default to a different limit.
The limits entered for this first grouping are sublimits of the Property at the Jobsite limit. This means that if these defaults are increased significantly, that jobsite limit should also be increased, or not all coverages may be provided as anticipated.
o Revised Limit – the default is $15,000
o Business Income/Extra Expense–Revised Number of Days – the default number of days is 30
o Separate Locations – if yes, the separate locations must be entered
The limits entered for this second grouping are separate and independent limits that have no impact on the coverage limits of Property at the Jobsite:
· Business Personal Property – the default limit is $25,000
· Claim Preparation Costs – the default limit is $10,000
· Contractual Penalties – the default limit is $10,000
· Expediting Expenses – $25,000
· Extra Expense – $25,000
· Fire Department Service – the default limit is $10,000
· Fire Extinguishing Systems Expense – the default limit is $10,000
· Lawns, Trees, Shrubs and Plants – the default limit is $25,000 per occurrence and $1,000 per item
· Pollutant Cleanup and Removal – the default limit is $25,000
· Preservation of Property Expense – the default limit is $10,000
· Temporary Structures Expense – the default limit is $25,000
· Trailers and Contents – the default limit is $25,000
· Valuable Papers and Records – the default limit is $10,000
Soft costs, Business Income and Rental Value per occurrence must be entered if desired. The occurrence limit is subject to any entered monthly aggregate Limits but these are optional.
A place to enter this limit is available but there is no statement in the coverage form about the limit. It could be a catastrophe-type limit that caps the insurance company’s liability but there is no statement about how this is to be used. An entry made in this area should be handled with extreme caution because it could be used as a cap over all of the coverages provided in the coverage form plus all coverages provided in any attached endorsements.
This section has a space to enter the coinsurance percentage that triggers the coinsurance additional condition if coinsurance applies.
Note: This applies only if IH 70 04–Existing Building or Structure Coverage or IH 70 05–Existing Building or Structure with Limited Collapse Coverage is attached.
A check in the box changes the valuation of that existing building or structure from ACV to Replacement Cost.
This section has spaces to enter the amount of deductible that applies to the following:
The following entries are made when coverage is written on a non-reporting basis:
The following entries are made when coverage is written on a reporting basis:
Any special provisions are entered in the space provided.
This analysis is of the 05 17edition. Changes from the previous edition are in bold print.
Introduction
This section encourages the
careful reading of the entire coverage form to determine what is covered, what
is not covered, rights, and duties. It defines we, us, and our as the insurance company that provides this insurance
coverage. It also defines you and your as the named insured on the
declarations. The reader is also pointed to the Definitions section because
certain words or terms used in the form have a more broadened or restricted
meaning.
The insurance company pays for direct physical loss or damage to covered property but only when that loss is from a covered cause of loss.
1. Covered Property (05
17 change)
a. The following is covered property but only while it is at the jobsite of the project described in the declarations:
|
Example: Carol acts as her own general contractor for the construction of her new home and purchases builders risk coverage for the project. The construction materials and supplies arrive and she keeps them in a shed awaiting the construction crew’s arrival. A sudden severe windstorm destroys the shed and $35,000 worth of the building materials and supplies. The materials and supplies are all intended to become part of the house, are considered covered property, and the loss is covered. |
b. The items in a. above are covered while at a temporary storage
location and while in transit.
c. Coverage ends on the earliest date that one of the following occurs:
. |
Example: Ace Construction finishes building a 30-unit
apartment building for Heartland Communities. Heartland accepts the property
and makes its final payment to Ace but delays placing the building in its
insurance program because none of the units are occupied and Heartland thinks
its insurance company will treat the building as vacant. It assumes that
Ace's coverage will apply until the tenancy is established because Ace has
not yet removed its construction debris from the premises. Vandals start a
fire in the debris pile that scorches and damages the building’s exterior
wall. This loss is not covered because Heartland accepted the property and
Ace no longer had a financial interest in the project |
2. Property Not
Covered
The following described property is excluded:
a. Any existing building or structure.
Note: This is particularly important for any renovation work
because that structure is never covered unless special arrangements are made.
IH 70 04–Existing Building or Structure or IH 70 05–Existing Building or
Structure with Limited Collapse Coverage would need to be attached.
Example: Ace Construction now turns its attention to renovating an older multi-story apartment building. Ace's builders risk policy is written correctly for the value of the renovations and improvements. The building’s owner mistakenly assumes that Ace covers the residual value of the building as well as the value of the improvements. A violent windstorm blows down some scaffolding and forms as well as a large part of an existing exterior wall. Ace's insurance company responds to the loss of the forms and scaffolding but not to the loss to the wall. |
b. Bodies of water or land. Land includes the land where the property is located.
c. Lawns, plants, shrubs, or trees
d. Tools and
equipment of contractors
3. Covered Causes of
Loss
Covered causes of loss are direct physical loss or damage to covered
property with the exception of causes of loss that are listed in the exclusions
section
4. Additional
Coverages
Note: It is confusing but there are two sections of additional coverage. Item 4. Additional Coverages is part of the limit of insurance while Item 5. Additional Coverages is not.
The following additional coverages are provided within the limits of insurance and not in addition to those limits. This means that any amounts paid out for these items will reduce the limits available to pay for other losses in the occurrence. The only exception is limits provided in the Debris Removal Coverage.
a. Below Ground Water
and Backup of Sewer and Drain (05 17 addition)
Water or waterborne
material damage to covered property is covered when
water or waterborne material does any of the following:
This coverage requires
that the named insured keep up maintenance or repair of sump pump and equipment
and also keeps the sewers and drains obstruction free. No payment will be made
if the named insured does not do so.
Any loss that is due
to the sump pump not working due to power failure is not covered.
The most paid is
$25,000 per occurrence. This limit can be increased.
b. Debris Removal (05
17 change)
Coverage applies to the costs to remove the debris of covered property
from a covered loss at a described premises. The expenses must be reported to
the insurance company in writing within 180 days of the date of loss. The most
paid is the lesser of 25% of the following:
An additional $10,000 is available to pay for
debris removal if either of the following apply:
Costs to extract pollutants from land or water or to remove, restore, or
replace polluted land or water are not covered under this Additional Coverage.
c. False Pretense (05 17 addition)
When the named insured, its agents, consignee
or customer gives away covered property voluntarily because they have either accepted a fraudulent bill of
lading or due to any other type of trick, scheme or similar type con game,
coverage applies for up to $25,000 per occurrence. The limit can be increased.
The only exception is when the perpetrator of
the fraud or con is an employee.
d. Limited Coverage for Fungi, Wet Rot, and
Dry Rot
(1) Coverage applies only if the fungus, wet rot, or dry rot results from a specified cause of loss or flood, if flood coverage is provided. Fire and lightning losses are excepted from B. Exclusions 1.Primary Exclusions g. Fungus, Wet Rot, or Dry Rot. As a result, this Additional Coverage excludes losses that result from them.
This coverage also applies only if the named insured takes all reasonable steps to prevent further damage to property during or following a loss.
(2) Loss or damage includes more than the direct damage to the property by the fungus, wet rot, or dry rot. It also includes the costs to remove them, as well as the costs to tear out and replace walls and other parts of the building to gain access to the problem area. Any testing necessary to verify that the property is clean and the situation mitigated is also covered.
(3) The limit of insurance for this coverage is an aggregate limit of $15,000 per policy year. This means that the limit for the policy year is $15,000, regardless of the number of locations and occurrences. There is no additional limit available once the limit is exhausted. If the condition continues over multiple policy years, the limit available in the policy year when the loss occurred that caused the fungus, wet rot, or dry rot is the only limit that applies.
The limit can apply per premises but is still an aggregate limit per policy year. This option is available if it is selected on the declarations.
(4) The $15,000 limit is a sub-limit. It does not increase the limit of insurance.
(5) If business income and/or extra expense coverage is provided, this Additional Coverage provides coverage in two different situations:
Example: A tornado strikes the Ace Construction warehouse and badly damages the building and some of the contents
inside. Out of fear that the building might collapse because of the heavy
damage, Ace moves all undamaged property outside under a temporary shelter it
erects and under some protective tarps. Despite all these efforts, some of
the property develops mold that must be mitigated and removed. Subject to
this coverage’s sub-limit of insurance, the costs to mitigate and remove the
mold are covered. |
e. Rewards (05 17 addition)
The insurance company reimburses a reward
that is paid by the named insured for up to $10,000 per occurrence subject to
the following conditions:
f. Site Preparation Costs (05 17 addition)
This additional coverage recognizes that
building cannot start until the site is properly prepared following a loss. The
costs the named insured incurred in the site preparation such as excavating,
filling, backfilling and other types of activities needed to prep the site are
covered. This applies only at the jobsite
shown on the declarations.
Note: Because of the wording, being specific
to a specific jobsite coverage may be
denied when the building at a described jobsite is not permitted and the building must
take place at another jobsite.
g. Testing (05 17 addition)
When covered equipment sustains a mechanical
breakdown during any testing the loss or damage to covered property is paid for
up to $50,000. This applies only when the equipment is at the jobsite.
Example: The boiler is
put under pressure as a test. Unfortunately, the test is unsuccessful and
damage to the boiler and surrounding property occurs. Exclusion 2.l would
exclude coverage for this loss but this additional coverage will pay up to
$50,000. |
5. Additional
Coverages
Note: It is confusing but there are two sections of additional coverage. Item 4. Additional Coverages is part of the limit of insurance while Item 5. Additional Coverages is not.
The following additional coverages provide additional limits that are not within the limits of insurance and do not reduce the amounts available to pay for other losses in the occurrence.
a. Business Personal Property (05 17 addition)
Five types of personal property are covered. The property must belong
to the named insured or be property belonging to others for which the named
insured is legally liable. The covered personal property is:
These are covered only as a part of the
described construction project and when damaged by a covered cause of loss.
Coverage applies while it is at the described jobsite,
in transit or while at a temporary storage location. This property is not
covered if it is to become a permanent part of the building project.
The limit of insurance is $25,000 unless
increased on the Declarations.
b. Claim Preparation Costs (05 17 addition)
Gathering the information to file a claim
can be an expensive proposition. This additional coverage provides up to
$10,000 to coverage them. Only those costs that are considered both reasonable and necessary are covered. The costs
must be related to loss or damage to
covered property by a covered cause of loss.
Even if they meet the requirement above, the
fees or expenses from the following are not covered:
c. Contractual Penalties (05 17 addition)
This coverage applies only when the first
named insured is the general contractor for the project described on the declarations.
Penalties that are stated in the contract for the described project on
the Declarations that is between the first named insured and its customer are
covered. In order to be paid the penalty must meet all of the following
criteria:
The most paid is $10,000 per occurrence but
the limit can be increased.
d. Expediting Expense (05 17 addition)
When a covered loss occurs a certain amount
of time is required to complete the repairs or to replace the covered property.
This additional coverage pays extra expenses that are incurred to reduce the “standard”
amount of time needed for the repairs or replacement. Those extra expenses paid are for both of the
following:
The most paid is $25,000 per occurrence but
the limit can be increased.
e. Extra Expense (05 17 addition)
After a covered cause of loss has damaged
covered property there is a period of restoration. This additional coverage
pays for expenses that are incurred by the named insured to reduce or avoid
entirely the suspension of the named insured‘s operations.
The most paid is $25,000 but the limit can
be increased.
If extra expense is more specifically
covered elsewhere this coverage is not in addition to that other coverage.
f. Fire Department Service Charge (05 17 change)
The insurance company pays up to $10,000
when the fire department is called to save or protect covered property from a
covered cause of loss. The limit can be increased. The limit applies regardless
of the number of responding fire departments, fire units, or the number or type
of services performed.
This coverage applies to only the named insured's liability for fire
department service charges it either contractually assumes before a loss occurs
or that a local ordinance or law requires.
This Additional Coverage is not subject to a deductible.
g. Fire Extinguishing Systems Expense (05 17
addition)
When a fire extinguishing system or handheld
extinguisher is discharged due to a covered cause of loss, up to $10,000 is
available to pay for its recharging or replacement. The cost of hydrostatic
testing is included in this coverage.
When a fire extinguishing system is
discharged accidentally up to $10,000 is available to pay for loss or damage to
covered property due to that discharge.
There is no coverage if any such discharge
happens during testing or installation.
The limit is per occurrence and can be
increased.
h. Lawns, Trees, Shrubs, and Plants (05 17
change)
Loss or damage to lawns, trees, shrubs, and plants intended for the
described construction project is covered. This coverage applies to only loss
or damage caused by or that result from specified
perils. There is a limitation that the wind and weight of snow, ice, or
sleet are not covered causes of loss.
The items are covered while at the jobsite, a temporary storage location or while in
transit.
The most paid in a single occurrence is $25,000, regardless of the type
or number of items involved, but not more than $1,000 for any one tree, shrub,
or plant. The limits can be increased.
i. Pollutant Clean Up and Removal
The insurance company pays to clean up pollutants caused by or that
result from a covered cause of loss that occurs during the policy period. The
most paid is $25,000 per premises as
an aggregate amount during each separate 12-month policy period. The expenses
are paid only if they are reported to the insurance company in writing within
180 days of the date of loss.
This coverage does not apply to costs to evaluate the presence or
effects of pollutants. However, it does pay for testing that is part of the extracting
of pollutants process from either land or water.
The limit can be increased.
j. Preservation of Property Expense (05 17
addition, change, and removal)
Note: The Preservation of Property additional coverage has been eliminated and this Additional Coverage that covers only the expense to do so is added. The prior form did not cover the expense so it is a bonus but this version does not provide the expanded coverage that is part of the Preservation of Property. The coverage for the property being moved would be under the Transit coverage and the Temporary Storage location coverage.
Covered property may need to be moved from an insured location in order
to keep it from being damaged by a covered cause of loss. In that case, the
insurance company pays up to $10,000 per occurrence for the costs incurred by
the named insured to place it in temporary storage and the costs to move it
there.
The maximum time away is 90 days.
k. Temporary Structure Expense (05 17 addition)
When a covered cause of loss causes damage to covered property other
than temporary structures, the cost to re-erect the temporary structure is
covered for up to $25,000 in a single occurrence.
Example: The windstorm tore off part of the brickwork and other
exterior finish on the building that had almost been finished. The cost to
repair the damaged to the brickwork and finish is covered and this coverage
pays to re-erect the needed scaffolding. |
l. Trailers and Contents (05 17 addition)
Trailers and their contents are covered while on the construction
project. The trailer can be leased, rented, or owned and can be either an
office or a construction trailer. Nothing is covered that is meant to become a
permanent part of the building project. In addition, valuable papers are also not covered.
The limit of insurance is $25,000 per occurrence but can be increased.
Note: This is a per occurrence limit and not a per trailer limit. It is important to determine how many trailers could be damaged in a single occurrence and the value of personal property in the trailers.
m. Valuable Papers and Records (05 17 addition)
The costs the named insured incurs in order to research, restore, and
replace the information that was lost when valuable papers or records that are
part of the construction project were damaged or lost by a covered cause of
loss. The valuable papers and records can be in any media including electronic.
The limit of insurance is $10,000 per occurrence. This limit can be increased.
6. Coverage Options
a. Earthquake-Volcanic Eruption (05 17
change)
The parts of the Earth Movement exclusion that are in conflict with this coverage option do not apply when a limit
for Earthquake-Volcanic Eruption is
on the Declarations.
Earthquake and Volcanic Eruption are added as a covered cause of loss. A volcanic
eruption is defined as not only the eruption but also the explosion or effusion
of a volcano. Volcanic and earthquake occurrences include all shocks that
occur within 168 consecutive hours. The policy’s expiration date does not
reduce this period as long as the event began before the policy expired.
The limit provided is within
the limits and not in addition to the limits of insurance. It is also an aggregate limit so that only the
remaining limits available after the first earthquake loss can be used to pay
for any subsequent loss.
b. Water Damage
The parts of the Water exclusion that are
in conflict with this coverage option do not apply when a limit for Water damage
is on the Declarations. The limits
provided are within the limits and not in addition to the limits of
insurance. An occurrence limit and a
separate 12-month aggregate limit can be entered. This means that only the
remaining aggregate limits available after the first water damage loss can be used
to pay for any subsequent loss. If only one the occurrence limit is entered, it
becomes the aggregate limit too.
Water damage is added as a covered cause loss. It is defined as flood,
surface water, waves, tidal water, tides, and the overflow of a body of water
or spray from any of the proceeding. It is also mudslide or mudflow.
1. Primary Exclusions
The first group of exclusions applies whether or not the loss event
results in widespread damage or affects a significant geographical area and is
essentially absolute. Subject to specific exceptions, each is totally excluded,
regardless of any other cause or event that contributes to a loss, either
concurrently or in any other sequence. The insurance company does not pay for
any direct or indirect loss or damage caused by or that results from any of
these events.
Related article: Concurrent Causation and Anti-concurrent Causation Clauses–A Discussion
a. Ordinance or Law
This exclusion applies to enforcing or complying with any law or
ordinance that regulates either how property can be constructed, used, or
repaired or that requires a property be torn down. The exclusion also applies
to any associates debris removal.
This exclusion applies even if the loss or damage is from a law or
ordinance that must be enforced despite the fact that the property was not
damaged or when a law or ordinance is enforced during the constructing,
repairing, renovating, remodeling, or demolishing of property following its
physical loss or damage.
b. Earth Movement
Earth Movement consists of five separate components:
(1) Earthquake includes any sinking,
rising, or shifting of the earth directly related to the earthquake.
(2) Landslide includes any sinking,
rising, or shifting of the earth directly related to the landslide.
(3) Mine Subsidence applies to only
man-made mines and applies whether the mine is operating or not. Mine
subsidence coverage is an option that may be purchased separately. In some
states, mine subsidence coverage is required to be offered in certain counties.
If coverage applies to property located in Illinois, Indiana, Kentucky,
Pennsylvania, or West Virginia, the laws in those states should be reviewed
carefully to determine the way to properly handle this exposure.
(4) Sinkhole Collapse is covered but all
other sinking, rising, shifting, eroding,
contracting, or expanding of the earth is excluded. Loss or damage caused by or
that result from water movement beneath the ground and poor soil conditions is also excluded.
However, if any of the events
described in (1)-(4) above cause or result in a fire or explosion, the
insurance company pays for the ensuing loss or damage the fire or explosion
causes.
(5) Volcanic
eruption is not covered unless fire,
breakage of building glass, or volcanic action ensues. Volcanic action includes airborne blasts and shockwaves, dust, ash,
and particulate material the volcano emits, as well as lava flow. The costs to remove dust, ash, and particulate matter is
excluded unless there is direct damage to the covered property.
Volcanic eruptions
are unpredictable, cause widespread damage, and usually occur over a period of
days. An eruption that takes place over a period of 168 consecutive hours is
treated as one occurrence. This is very important to an insured that has a
substantial deductible for this coverage. Instead of a number of deductibles
applying to multiple events, only one deductible applies to each 168-hour
period. On the other hand, this also means that only one limit is available for
all losses that occur within that same time period.
All
aspects of this exclusion apply regardless of whether nature or any other force
causes the event.
The
following property is not subject to this exclusion:
c. Governmental Action
This exclusion applies to the legal and authorized seizure or
destruction of property by a government entity’s order. There is one exception.
Loss or damage that is caused when the governmental entity orders property to
be destroyed is covered if used as a method to prevent a fire from spreading is
covered. However, this exception applies only if the fire being contained would have been a covered fire
under this coverage form.
d. Nuclear Hazard
Nuclear reaction, radiation, or radioactive contamination is not
covered. There is an exception. If a fire results from the nuclear reaction, radiation or radioactive contamination
there is coverage for the direct loss or damage caused by that fire.
e. War and Military Action
This exclusion lists three specific warlike activities.
f. Water (05 17 change)
Loss
or damage caused by the action of water outside the building is excluded. To
further clarify this exclusion, it is broken down into five separate
components. Each defines exactly what water means.
(1) Flood is excluded. Flood is surface water, tides, tidal
water, and waves. Waves include tidal waves and tsunami. Overflow of any body of water is also excluded.
A body of water is a natural or man-made river, creek, ocean, or lake. Spray
from any of the above, wind-driven water, and storm
surge are also excluded.
(2) Mudslide and mudflow occurs when a sudden
large volume of water mixes with unstable soil conditions and is excluded.
(3) Water backing up, overflowing or being discharged in any
way from a sewer or drain is not covered. Such backing up, overflowing or
discharging of water from a sump, its pump, or related equipment is also
excluded
(4) Water saturated ground can create hydrostatic pressure against a building's surface or
subsurface portions. Loss or damage caused by or that results from such water
that enters through foundations, walls, floors, paved surfaces, basements,
doors, windows, and other building openings is excluded.
(5) Damage caused by waterborne material that is carried by
waters described in (1), (3), and (4)
above is also excluded. Such material moved or carried by mudslides or mudflow
described in (2) above is also excluded.
ISO
adds a paragraph that explains when this entire exclusion applies. It applies
whether any of the events are caused by an act of nature or otherwise. In order
to clarify the term "otherwise," ISO provides an example that uses
the terms “dam,” “seawall," "levee," "boundary" or
"containment system" and states that any of them failing to contain
the water is an "otherwise" type situation. However, it is important
to note that using this example format does not limit the exclusion to failure of only those specific items. The goal
is to define the term "otherwise" as broadly as possible.
Much
like other exclusions, if fire or explosion occurs because of any action
of water, coverage applies to the loss or damage the fire or explosion causes.
In addition, if a sprinkler leakage loss occurs due to these actions of water,
coverage applies to the loss or damage the sprinkler leakage causes. Sprinkler
leakage coverage applies only if sprinkler leakage is a covered cause of loss
on the coverage form or policy.
g. Fungi, Wet Rot, and Dry Rot
This is loss or damage caused by or that results from the existence or any activity of fungi, wet rot, or dry rot. However, if the existence of fungi, wet rot, or dry rot causes a specified cause of loss to occur, coverage applies to the loss or damage that specified cause of loss causes.
This exclusion does not apply if the fungi, wet rot, or dry rot resulted from a fire or lightning loss. It also does not apply to coverage that Additional Coverages Limited Coverage for Fungus, Wet Rot, and Dry Rot provides.
Note: Refer to F. Definitions 1. Fungi for a list of items that Fungi includes.
h. Virus, Bacterium, or Other Microorganism
Virus, bacterium, or other microorganism means any of these that induces
(or is capable of inducing) any physical distress, illness, or disease. This
exclusion does not apply if the loss or damage is caused by or results from
fungi, wet rot, or dry rot.
This exclusion, or the application of its terms to a specific loss, is
not intended to create coverage for any loss otherwise excluded. It also
applies to all coverages that this coverage form includes, including forms and
endorsements that cover business income, extra expense, or acts of civil
authorities.
2. Secondary
Exclusions
The second group of exclusions applies to loss or damage caused by or
that result from any of the following loss events. Some of these exclusions
have exceptions, conditions, or limitations that should be noted and reviewed
carefully. The insurance company does not pay for any loss or damage caused by
or that result from any of these events.
a. Theft from an unattended vehicle
This is loss due to theft from an
unattended vehicle. There are two exceptions.
b. Delay, loss of use, and loss of market
These are consequential or indirect losses that develop as a result of a
direct loss or damage.
c. Unexplained disappearance
When covered property is gone and there is no obvious cause or
explanation of what happened to it.
d. Shortage found upon taking inventory
Any loss that is discovered as a result of an inventory shortage and
there is no explanation as to what happened to the property, similar to the unexplained disappearance. This is sometimes
referred to as "inventory shrinkage."
e. Dishonest or criminal acts
These are any dishonest or criminal acts that the named insured, its
partners, employees, temporary employees, leased workers, officers, directors,
trustees, authorized representatives, or members and managers of a limited
liability company commit. This also includes theft.
Such acts committed by anyone with an interest in the property, their
employees, temporary employees, leased workers, or authorized representatives
who act alone or who act in collusion with other parties or with each other are
also excluded. This exclusion also applies whether or not the acts take place
during regular working hours.
This exclusion does not apply to acts of destruction by the named
insured’s employees, temporary employees, leased workers, or authorized
representatives. However, there is no coverage for theft by the named insured’s
employees, temporary employees, leased workers, or authorized representatives.
f. Artificially generated electrical, magnetic, or electromagnetic energy (05
17 change)
Loss or damage that is caused by or that results from artificially
generated electrical, magnetic, or electromagnetic energy damaging, disturbing,
disrupting, or interfering with any of the following:
Examples of this excluded energy are electrical current, charges a magnetic or electromagnetic field produces, and microwaves but is not limited to just these. There are two exceptions:
g. Voluntary parting (05 17 change)
The named insured or anyone else entrusted with the property being
tricked or deceived into giving that property away. There is one exception. This does not apply if coverage is provided
in the False Pretense Additional Coverage.
h. Unauthorized instructions
When covered property is transferred to another person or place because
unauthorized instructions were received to do so.
i. Neglect
Neglect on an insured’s part to do take reasonable measures to preserve
and protect covered property from subsequent damage during and after the time
of loss.
j. Theft
Theft by any person the named insured entrusts with covered property to
for any reason, whether they act alone or act in collusion with any other
party. This exclusion applies 24 hours a day/7
days a week. There is one exception. Covered property that is in a
carrier for hire’s care, custody, or control is not subject to this exclusion.
k. Rain, sleet, ice, or snow
Loss or damage caused by or that results from rain, sleet, ice, or snow
that enters the interior of a covered building or structure but only when the
exterior is not considered completed. A building or structure’s exterior is
considered completed when it is weather resistant in all respects and the
installation of its systems and components is complete and permanent.
Some examples of components are exterior walls and their siding,
windows, doors, vents, and the roof. Some examples of systems are heating,
air-conditioning, ventilating, mechanical, electrical, and drainage. This list
of examples is not inclusive and is not limited to just these.
Nothing in this exclusion impacts how the 3. Other Exclusions a. Weather
Conditions applies.
l. Explosion (05 17
addition)
The following types
of explosions are excluded:
There are three
exceptions:
3. Other Exclusions
This group of exclusions applies to loss or damage caused by or that
result from any of the following loss events. In every case, if loss or damage
by a covered cause of loss occurs as a result of one of these excluded events,
coverage applies to the loss or damage
the resulting covered cause of loss
causes. The insurance company does not pay for any loss or damage caused by or
that results from any of these events.
a. Weather conditions
Loss or damage to covered property that weather conditions cause. This
exclusion applies only if the weather conditions contribute in any way with a
cause or event that involves the following 1. Primary Exclusions to produce the
loss or damage:
·
a.
Ordinance or Law
·
b.
Earth Movement
·
c.
Governmental Action
·
d.
Nuclear Hazard
·
e. War
and Military Action
·
f.
Water
·
g.
Fungi, Wet Rot or Dry Rot
·
h.
Virus, Bacterium or Other Microorganism
b. Acts or decisions
Acts or decisions any person, group, organization, or government entity
makes that result in loss or damage. Failing to act or to make decisions is
also excluded.
c. Faulty, inadequate, or
defective
With respect to all or part of any property wherever located, coverage
does not apply to any of the following faulty, inadequate, or defective:
d. Wear and tear
Loss or damage that is due to normal use or age that occurs naturally.
e. Any quality in the property
These are any qualities in the property that cause it to destroy or
damage itself.
Note: An example is loss or damage caused by hidden or latent defects in the property.
f. Mechanical breakdown
Loss or damage that is caused by or that results from machines, tools,
or mechanisms failing to operate or to function properly.
g. Insects, vermin, or rodents
Loss or damage to covered property when
caused by or that results from insects, vermin, or rodents.
Note: Some examples are damage from mice, rats,
cockroaches, squirrels, beavers, spiders, ants, centipedes, and ticks. Each is
characterized by destructive habits that cause damage, such as gnawing and
nibbling.
h. Rust, other corrosion, dampness, or extremes of temperature
This is rust, other corrosion, dampness, or extremes of temperature that
cause loss or damage to covered property.
Notes:
Rust and corrosion are low-temperature oxidation processes that result
in deterioration over time due to inactivity or neglect.
Dampness and temperature extremes can affect the oxidation process that
affects different forms of property and can have other effects on the same and
other forms of property.
i. Settling, cracking,
shrinking, bulging or expansion (05 17 addition)
There are no exceptions.
The most the insurance company pays for loss or damage in a single
occurrence is the limit of insurance on the declarations for the applicable
coverage.
The deductible on the declarations must be exceeded before the insurance
company pays anything. Once the deductible is satisfied, the insurance company
will pay up to the limit of the insurance that applies. The deductible applies
on a per occurrence basis.
There is one exception. Property in transit is not subject to the
deductible.
1. Valuation (05 17
change)
This condition replaces the Valuation General Condition in the Commercial Inland Marine Conditions.
The valuation of any covered property is based on its replacement cost as of the time of loss. Replacement is what it will cost to replace that property without taking into consideration depreciation.
The named insured has the option to make a claim initially for actual cash value instead of replacement cost. This allows the named insured to obtain a monetary settlement to start rebuilding. It can then make a replacement cost claim later. This option of a second claim is permitted only if the named insured notifies the insurance company, within 180 days of the loss, that it will be doing so.
Replacement cost is paid only after the property is repaired or replaced and then only if the repair or replacement was handled within a reasonable amount of time. If both conditions are not met, the claim is paid as actual cash value.
The replacement cost based payment will be no more than the least of the following:
The property is not required to be built at the same premises but payment is limited to no more than what it would have cost to build at the same premises.
Any cost to repair or replace must not include ordinance or law enforcement increases.
When the damage or lost property belongs to others and there is a written contract that determines the named insured liability for that property, the valuation of that property is based on that liability established in that contract. However, it is still subject to the replacement cost of the property and the limit of insurance.
2. Other Conditions
These conditions apply in addition to the Commercial Inland Marine Conditions and the Common Policy Conditions.
Related Articles:
IL 00 17–Common Policy Conditions Analysis
CM 00 01–Commercial Inland Marine Conditions
a. Coverage Territory
The coverage territory is the United States of America, its territories
and possessions, Puerto Rico, and Canada. This includes property that is shipped
by air within and between these points.
b. Coinsurance
This condition applies if there is a coinsurance percentage on the
declarations.
The insurance company does not pay the full amount of any loss or damage
if the value of the covered property at
the time of loss or damage multiplied by the coinsurance percentage is more
than the limit of insurance for all covered property at that location. In such
cases, the amount the company pays is determined as follows:
Step
1. Multiply the value of
the covered property at the time and location of the loss or damage by the
coinsurance percentage on the declarations.
Step
2. Divide the limit of
insurance for covered property at the
location where the loss or damage occurred by Step 1.
Step
3. Multiply the total
amount of loss or damage at the loss location by Step 2. before applying the
deductible (if any).
Step
4. Subtract the amount of
deductible from Step 3.
The insurance company pays the lesser of Step 4. or the limit of
insurance. Any amount that remains must be paid by other insurance or the named
insured must pay it from its own funds.
There are 17 definitions.
1. Breakdown (05
17 addition)
The physical loss
causing damage to covered equipment in such a way that it must be repaired or
replaced. The loss must be due to:
The following are not
included within this definition:
2. Computer equipment
(05 17 addition)
Electronic equipment
that belongs to the named insured and is programmable. It must be used to
store, retrieve, and process information. The term is broad and includes the
safety features needed for the equipment such as air conditioning, fire
suppression system and other devices that are exclusive to the computer
operations.
Peripheral equipment
that goes with the other computer equipment described above in order to provide
additional functions such as printing and communication.
3. Covered Equipment (05
17 addition)
a. Covered equipment
is the following:
b. Covered equipment
does not mean or include the following:
Note: As used in chemistry, a catalyst is a substance that modifies and
increases the rate of a reaction without being consumed in the process.
Note: Equipment otherwise covered and only occasionally used on
dragline, excavation, or construction equipment is covered.
4. Data (05
17 addition)
Programmed and
recorded material that is stored on media. It is also programming records that
are used for electronic data processing or to electronically controlled
equipment.
5. Extra Expense (05
17 addition)
The additional cost
the named insured incurs to operate its business during the period of
restoration. It is those costs that are in addition to the normal costs of
operations that would have been incurred during the same period had there been
no loss.
It does not include
repair or replacements expenses unless the expenses reduce the loss that would
otherwise have been paid. Similarly, research, replacement, and restoration costs related to information is
not covered unless incurring those expenses reduces the loss that would
otherwise been paid.
6. Fungi
These are any type
or form of fungus. Fungi include mold, mildew, mycotoxins, spores, scents, or
any by-product that fungi produce or release.
7. Media (05
17 addition)
This is electronic
data processing or storage media. Examples are films, tapes, discs, drums, or
cells.
8. Money (05
17 addition)
Currency, coin, or
bank notes that have a face value and that are in current use. It also means
traveler’s checks and money orders that are being held for sale.
9. Operations (05
17 addition)
Those business
activities of the named insured that depend upon the covered property.
10. Period of
Restoration (05 17 addition)
This is the period of time
during which coverage applies. It begins either:
Under either of these, coverage
ends on either the date when property at
the described premises should be repaired, rebuilt, or replaced or the date the
business reopens at a new location. A major sticking point in evaluating when a premises should be ready is the clarifying
statement that the repairs, building, or replacing must be done on a timely
basis and with substantially similar materials.
The period of restoration does
not include any increased time period required because of an ordinance,
regulation, or law being enforced or
because of the compliance with any ordinance, regulation, or law regulating the construction, use, repair, or demolition of any
structure.
The period of restoration also
does not include any increased time period required to test for, monitor, clean
up, remove, contain, treat, detoxify, neutralize, or in any way respond to or
assess the effects of pollutants.
The policy expiration date does
not affect the period of restoration.
11. Pollutants
These are irritants and contaminants such as smoke, vapor,
soot, fumes, acids, alkalis, chemicals, and waste
of a solid, liquid, gaseous, or thermal nature. Waste includes property to be
disposed of, as well as property to be recycled, reconditioned, or reclaimed.
12. Securities (05 17
addition)
Securities represent money or
property but they are not money or property. They are instruments and contracts
and can be negotiable or nonnegotiable. Examples of such instruments or
contracts are tokens, tickets, revenue, and other stamps, including stamps in a
postage meter. Evidence of debt related
to credit or charge cards are securities but only if the named insured did not
issue the cards.
Note: Some securities may
represent commodities, such as grain or coal.
13. Specified Causes of Loss (05 17 addition)
This means only the following
causes of loss: Fire, lightning, explosion, windstorm, hail, smoke, aircraft,
vehicles, riot, civil commotion, vandalism, leakage from fire extinguishing
equipment, volcanic action, and weight of snow, ice, or sleet. The following
are also considered specified causes of loss:
a. Sinkhole collapse is the
sudden sinking or collapse of land into spaces created by water acting on
dolomite or limestone. The cost to fill sinkholes and the sinking or collapse
into man-made underground spaces is not part of this cause of loss.
b. Damage caused by falling
objects is covered. However, coverage does not apply to loss or damage to
personal property that has been left in the open. It also does not apply to
loss or damage to the interior of a building or to personal property inside the
building unless the falling object first damages the roof or an outer wall.
c. Water damage is accidental
discharge or leakage of either of the following:
The water or sewer pipe must
be part of a municipal water supply system or municipal sanitary sewer system.
Wear and tear must cause the pipe to crack or break.
This definition is limited by
conditions in the Water Exclusion. Any situation the Water Exclusion excludes
is not considered water damage. CP 10 30 then provides two examples of when
situations that may appear to be water damage are not water damage because they
are not covered under the Water Exclusion.
ISO Example 1: Weather induced flooding causes a pipe to break
apart, causing water damage. There is no coverage even if wear and tear
contributed to the pipe breaking because flooding caused the pipe to break.
ISO Example 2: A pipe breaks
because of wear and tear. Damage that
occurs following that break because of weather-induced flooding or that becomes
worse because of it is excluded.
14. Suspension (05 17
addition)
The complete closure of the named
insured’s business operations or a slowdown.
15. Temporary storage location
(05 17 addition)
Any location where property that is supposed to become part of the
construction project is stored as it awaits being taken to the jobsite.
16. Testing (05 17 addition)
Only the three types of
testing described below are considered testing under this coverage form:
17. Valuable papers and
records (05 17 addition)
These are documents,
manuscripts and other written, printed, or inscribed records. They include
mortgages, maps, films, drawings, books, deeds, and abstracts but it does not
include money or securities.
ISO has developed the following endorsements for exclusive use with the Builders Risk Coverage. All are new in the 05 17 edition:
IH 70 01–Permission to Occupy the Premises
The coverage form ceases coverage when a premises is occupied and used for its intended purpose. This endorsement deletes that part of the condition but only for the specific property described in the endorsement schedule.
IH 70 02–Limited Coverage for Specified Equipment
This is to be used only when IH 70 03–Builders Risk Breakdown Protection Coverage is attached because it limits the coverage it provides. When the covered equipment scheduled on this endorsement is damaged, only labor and material costs are covered as described.
IH 70 03–Builders Risk Breakdown Protection Coverage
The exclusions related to equipment breakdown coverage in the builders risk coverage form are eliminated and covered property that is at a jobsite as a part of the construction project are covered for mechanical breakdown when this endorsement is attached. Limits for the coverage must be scheduled in the endorsement.
IH 70 04-Existing Building or Structure Coverage
The existing structure is excluded from the Builders Risk Coverage Form. If coverage for it is desired, this endorsement is attached. The limit for it is entered on the Builders Risk Declarations. The valuation is actual cash value unless replacement cost is selected on the same declarations. A vacancy condition is contained that excludes certain causes of loss if there are no operations at the site for over 60 days.
IH 70 05–Existing Building or Structure with Limited Collapse Coverage
This is more restrictive than the coverage in IH 70 04.
The Builders Risk Coverage Form does not exclude Collapse. This means that when the IH 70 04 endorsement described above is attached, the existing building is not subject to a collapse exclusion. Because most commercial property coverage forms DO exclude collapse and then add it back only in a named way, this endorsement is needed. The Collapse exclusion is added for only the existing building or structure and then collapse coverage is added back in a similar way that it would be added to a commercial property coverage form.
IH 70 06–Building Risk Escalation of Limit
The Escalation of Limit is similar to the inflation guard optional coverage in the commercial property coverage forms except that it is not scaled by number of days. Instead, the full amount of whatever percentage is entered is multiplied by the limit of insurance to develop the additional limit available to pay for a loss.
IH 70 07-Production Machinery Exclusion
Coverage for production machinery is excluded when this endorsement is attached. This type of machinery is extremely expensive and may be placed in the building very late in the building process. Eliminating coverage for this may reduce the entire builders risk cost significantly. There should be a written agreement between parties as to who is actually covering this property prior to attaching this endorsement along with evidence that the coverage has been obtained.
IH 70 08–Project Reporting Form
When the Builders Risk Declarations states that the policy is on a reporting basis, this endorsement must be attached to provide an explanation of how a reporting form works.
IH 70 09–Project Protective Safeguards
This is a very restrictive endorsement. If the protective safeguards described in the endorsement schedule are not in place and active when a fire, theft, or vandalism loss occurs, there is no coverage for that loss.
However, there are also eight general-purpose endorsements that may be used.
IH 99 12–Separate or
Subcontractors Coverage
Separate coverage for a portion of a construction project may be provided. In that case, this endorsement is used to provide that coverage.
IH 99 13–Separate or
Subcontractors Exclusion
Separate coverage for a portion of a construction project may be excluded. In that case, this endorsement is used to exclude coverage for that portion of the construction project.
IH 99
14–Mortgageholders
This endorsement is used to outline the mortgagee’s rights and duties when the covered property is subject to a mortgage.
IH 99 15–Delay in Completion (05 17 change)
This endorsement covers softs costs, business income, and rental value after direct loss or damage to covered property. Examples of soft costs are additional interest, taxes, advertising expenses, insurance expenses, commissions, legal and accounting costs, architectural and building inspection expense, permit fees, storage charges, and survey costs.
Entries must be made on the Builders Risk Declarations if this endorsement is attached.
IH 99 21–Ordinances or
Law Coverage
Ordinance or law is excluded in the Builders Risk Coverage Form. If
coverage is desired, this endorsement is attached with the schedule completed to show the coverages and limits
desired.
IH 99 22-Loss Payable
Loss payees who have insurable interests in covered property are listed
on this endorsement along with the property in which they have that interest.
Note: No commitment is made to notify them of any
cancellation.
IM 99 26–Named Storm
Percentage Deductible
Any loss that is due to a storm that has been named by either the
National Hurricane Center or the Central Pacific Hurricane Center is subject to
the deductible scheduled on this endorsement when it is attached.
IM 99 27-Increased
Cost of Loss and Related Expense for Green Upgrades
When a property is being built to green certifications, this endorsement
should be attached in order to provide the needed green upgrades. This is
particularly needed if the certification had been received prior to the loss
and must be recertified.
Builders risk coverage forms cover both building materials and supplies at the construction site, in transit to the site, and similar property intended for the construction project at other locations as necessary (or because of lack of storage space at the construction site). The principal exposures and causes of loss are fire, theft, vandalism, windstorm, collapse, and transit. The underwriting process involves evaluating the location and transit exposures and the protective services and arrangements incorporated into the project to eliminate or reduce the possibility of loss.
The most important element in underwriting builders risk insurance lies in understanding the nature of the contractor involved. The contractor should have experience in building the type of structure being considered. A residential contractor may be very successful building one and two-family homes but that does not mean it will be similarly successful building a six-family condominium building or some other kind of commercial property. Similarly, a commercial building contractor may not be aware of all of the aspects and pitfalls involved in residential construction. Simply being a contractor is not sufficient. A good contractor is aware of all the aspects and hazards of a specific job and takes the appropriate steps to address all of them, both in advance planning and as they come up during the course of the construction project.
Another major issue is job site supervision. Some contractors are "paper contractors." These contractors bring together the various subcontractors to handle the job but do not regularly have any of their own employees on the job site. In situations like these, relationships are extremely important. A good "paper contractor" uses the same subcontractors on as many jobs as possible, to the extent possible. This makes it more likely that the different crews will work well together. The contractor should have a detailed checklist and an established timetable to check the work. The general contractor is usually responsible for all functional aspects at the job site and should be aware of all elements of job site safety and the normal arrangements that should apply.
The number of jobs being worked on at the same time is also important. In the case of multiple job sites, the contractor should have sufficient regular supervision at all sites at all times. Job sites over which the contractor has authority but does not regularly visit can quickly become disorderly and fall behind schedule. Inferior workmanship in plumbing, electrical, and framing is quickly covered up and hidden if not observed regularly and frequently.
If the building is being constructed in areas subject to high winds, the walls should be properly shored up and braced before the roof is added to eliminate or reduce the chance of wind losses. Any other similar atmospheric or geographic issues that can affect construction must be evaluated and adequate protection or needed safeguards implemented to reduce loss potential.
Written contracts and agreements are as important in the construction field as they are anywhere else. Contracts should be in place to establish ownership and responsibility and to reduce the chances of ambiguity and disagreement if a loss occurs.
Attention to details early in the process pays benefits later. Small and insignificant details may not seem important until a loss occurs. The nature and details of the transit exposure should be analyzed and all affected parties should understand them. Paper contractors usually have little or no exposure in this area compared to contractors that are active and involved on the job site. Workers’ tools, scaffolding, and related equipment are frequently overlooked but are subject to transit exposures and losses as much as building materials. Some types of property should be insured under contractors’ equipment coverage. Others should be insured under builders risk coverage. It is important to be certain that the transit limit is sufficient to cover the values exposed to the variety of transportation hazards.
The type of construction is a major factor in both underwriting and rating. Construction methods vary greatly, as do wind and fire exposures. Frame construction is by far the most common construction type and is most subject to wind and fire losses. Brick veneer construction has little impact on loss potential because it is simply a layer of masonry veneer attached to the wood frame and the basic construction is still considered frame. Solid brick or masonry bearing walls construction stand up better to wind and fire but require greater construction time and damage can be more expensive to repair. Metal buildings are similar to frame with respect to the wind exposure. Metal building construction is vulnerable to a number of issues until the roof is securely attached. However, fire is not ordinarily one of them. Masonry, non-combustible and fire-resistive are the best types of construction but construction using these materials takes more time and is considerably more expensive.
Every type of construction has its own issues that relate to job site security against vandalism and theft. The more involved, elaborate, and expensive types of construction require using a variety of heavier equipment and this element affects the job site security issue more than anything else does. As a result, these job sites require more security measures than those of lesser quality and that have less equipment on the site, whether occupied and operating or not.
It is important to understand the financial interests of all the parties in the property under construction and any contractual obligations that they have to one another. The worse case scenario is where each party believes the other is responsible for purchasing the builders risk coverage and nobody purchases it at all. If more than one policy is purchased, the only damage done is the amount of extra premium paid. If nobody arranges for coverage, it means the entire project is not covered.
The coverage form to be used must be considered, since reporting forms are available in addition to scheduled and non-reporting forms. Each approach has advantages, disadvantages, and responsibilities that the named insured must understand. The reporting form is flexible and leads to a greater feeling of security but improper or inadequate reporting can diminish those advantages and spell disaster in the event of a loss.